Here is brief list of safety concerns you must know. Before you run your fireplace for the first time, have it inspected, and thoroughly read the owners manual. Clean away any dust or debris that may have built up during construction, i.e. wood chips or drywall dust which could damage the motor, burners or the fan. Ensure your fire detector is running correctly, and also think about installing a carbon monoxide gas detector near your fireplace.
Wait 5 minutes before trying to ignite the pilot burner if it goes out, this helps to make sure any gas that may be in the air will have dissipated Cooling And Heating Tucson . Keep children from getting too close to the fireplace when it is being used, as skin or clothing can quickly burn if pushed against the glass face. Before cleaning or wiping down the fireplace, guarantee that it has completely cooled off. Also, make a point of frequently checking the outdoor location around the vent to make certain there is no build up of debris.
If you feel anything is wrong with the way your fireplace is running, it is best to act quickly and contact the gas company or your fireplace provider, and have it looked at immediately. Things to be familiar with consist of any unusual odors, or if the flames appear to be jumping or sputtering in an uncommon manner. Any maintenance on either the venting system or firebox should be done by a certified expert. I recommend you keep an in-depth record of all inspections and service work that is done on your fireplace, and it may also be a good idea to keep all receipts, guarantees, and all related paperwork in one folder for the ease of reference.